Subaru-robin EH72 FI User Manual download pdf (Page 11)

−

5

−

3. PRE-OPERATION CHECKS

5W

10W

20W

#20

#30

#40

10W-30

10W-40

Single

grade

Multi

grade

Ambient

temperature

-20 -10 0 10 20 30

40

-4 14 32 50 68 86

104

Upper level

Lower level

Oil gauge

Oil

gauge

■ When filling oil in the engine, keep the

engine level and fill the oil up to the

upper mark of the oil gauge. Measure

the oil level with the oil gauge plugged

in position.

■ After an oil change, run the engine,

and recheck the oil level. The oil level

may drop a little as the oil fills the oil

filter. Fill the oil up to the upper mark of

the oil gauge.

■ Change oil if it is contaminated.

(See Section 8 Maintenance Schedule.)

■ Use 4-stroke automotive detergent oil

of API service class SE or higher grade

(SG, SH or SJ is recommended).

■ If multi-grade oil is used, oil

consumption tends to increase when

the ambient temperature is high.

CHECK ENGINE OIL

(DAILY)

Before checking or refilling engine oil, be

sure the engine is not running and is located

on a stable, level surface.

■ If the oil level is below the lower level

line on the oil gauge, refill with the

proper oil (see table) to the upper

level.

OIL CAPACITY : 1.55 liter

Oil

gauge

Upper

level

Lower

level

Oil

gauge

Upper

level

Lower

level

STD-type Option

EH72FI us_EU6943 09.12.21 3:07 PM ページ5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 79 80

Comments to this Manuals

No comments